Foam Compression Tester

Setšoantšo sa F0013

Foam compression tester e lumellana le litekanyetso tse loketseng, tse sebelisetsoang ho hlahloba foam.
Sesebelisoa sa bokhoni ba ho hatella. E sebelisoa haholo lihlahisoa tsa foam, tlhahiso ea materase, baetsi ba litulo tsa likoloi le liindasteri tse ling, tse sebelisoang ho lemoha laboratoring le melapo ea tlhahiso liindastering tsena.

Ka kakaretso litekanyo tsa ho thatafala le ho thatafala li ipapisitse le thepa ea 'mele e bitsoang indentation force deflection, ka ho fumana kamano lipakeng tsa tekanyo ea botenya ba karolo ea teko e hlokahalang ho hatelloa le matla a selikalikoe a turret a sebelisoang.
Ha tester e sebelisoa ho sampuli, plenometer e chitja e amoheloa ka nako e le 'ngoe ho tloha ho sensor mme e tlaleha tekanyo ea indentation. E le ho bapisa liphetho tsa liteko, sengoathoana sa teko se tlameha ho ba boholo bo lekanang le botenya.

Software:
Foam compression tester e fana ka software e tšehetsang mesebetsi e mengata e ka sebelisoang taolong ea nako ea nnete le ho fumana data e tsoelang pele, mme e ka hlophisoa ho latela litlhoko. Software
O ka thusa tlhahlobo ea litekanyo tsa liteko le ho hlahisa mefuta eohle ea data. Software ena e tsamaisana le lisebelisoa tse ngata tsa khomphutha (Windows XP,
Windows Vista, Windows 7, joalo-joalo). Software ea liteko e tlaleha data ka bo eona bakeng sa sampole e 'ngoe le e 'ngoe ea tlhahlobo nakong ea tlhahlobo, e ikemetseng ka botlalo. Sebopeho sa software se ka kenya ts'ebetso ea "paramethara" ea ts'ebetso, 'me sa lokisa tlhahlobo ea phanele, ho kenyelletsa le mefuta ea liteko, lisampole, boholo ba sampole, litekanyetso tse tloaelehileng tsa litšupiso, joalo-joalo,' me tsa bolokoa hamorao.
Mananeo a software bakeng sa liteko tsa compression ea foam a bohlale. Hang ha lenane la tlhophiso ea teko le setiloe, tobetsa feela konopo ea "Qala", tlhahlobo e tla sebetsa ka bo eona. Liphetho tsa liteko li hlahisoa komporong ka nako ea nnete, ebe li latela litlhoko (tse bolokiloeng kapa tse hatisitsoeng).

Mosebetsi oa software:
• Maqhubu a ho nkuoa ha data a ka feto-fetoha
• Ho falla kapa ho laola thepa
• Litekanyetso li hlahisoa ka nako e le 'ngoe
• Lintlha tse hlahang ka nako ea sebele ea litšoantšo
• Pontšo ea setšoantšo ka boikhethelo
• Tlhahiso ea data ke foromo ea Excel
• Ho ema ka tšohanyetso
• Kamora tlhahlobo ea othomathiki, khetha tlhahlobo ea ho potoloha hape
• Seletsa sa Calibration
•Tlhahlobo ea Lipalopalo
• Hatisa tlaleho
• E lumellana le tsamaiso ea Windows
• Mananeo a ipapisitseng le maemo a ISO le mekhoa e tloaelehileng ea tlhahlobo ea ASTM
• Lenaneo ho latela mekhoa e meng ea teko
• Rekota tlaleho ea data ka 'ngoe tekong ea loop

Kopo:
• Foam e bonolo ea polyurethane
•setulo sa koloi
• Setulo sa baesekele
•Materase
• thepa ea ka tlung
• Setulo

Likaroloana:
• A loketse fapaneng sampole bophara
• Ho bonolo ho sebetsa
• Leka boholo bo fapaneng
• 322 ± 2 square centimeter hlooho e chitja (8 “Ø)

Taelo:
• Kenya sistimi e koetsoeng ea loop ho fokotsa sekhahla sa phoso.
• Khatello: 0 -2224N
• Leeto (mm): 750 mm (ho nepahala 0.1 mm)
• Lebelo (mm / motsotso): 0.05 ho 500 mm / min
• Sekhahla sa phoso ea lebelo: ± 0.2%
• Lebelo la ho khutla (mm / s): 500mm / min
• Ho nepahala ha tekanyo ea mojaro: ± 0.5% boleng ba pontšo kapa ± 0.1% sebaka se felletseng
• Laola zeroing ea othomathike, tlhophiso ea sensor ea mojaro
• Tshebetso ya tshireletso: Ho ema ha tshohanyetso ha o etsa teko ya boima bo feteletseng

Likhetho:
• Khatello e khethehileng ea sensor ea khatello
• segokanyimmediamentsi sa sebolokigolo tshebetso
• Hlooho: 13 1/2 “Ø

Tekanyetso e sebetsang:
• AS 2281
• AS 2282.8
• ASTM F1566
• ASTM D3574 – Teko ea B
• ISO 3386: 1984
• ISO 2439
• BS EN 1957: 2000

Lihokelo tsa motlakase:
• 220/240 Vac @ 50 hz kapa110 Vac @ 60 HZ
(E ka etsoa ho latela litlhoko tsa bareki)

Boholo:
• H: 2,925mm • W: 2,500mm • D: 1,350mm
• Boima ba 'mele: 245kg